Series 415
Butt Fusion
Tapping Saddle
Branch |
Base Pipe |
1/2" |
2"> |
3/4" |
2"> |
1" |
2"> |
1 1/4" |
2"> |
1 1/2" |
2"> |
2" |
3"> |
3" |
4"> |
4" |
6"> |
The POLY-CAM Butt Fusion Tapping Saddle |
| Product Specifications: |
| Manufactured for installation on PE 3408 Polyethylene Pipe |
| ASTM D 2513 |
| ASTM 3035 |
| ASTM F 714 |
| AWWA C 901 |
| AWWA C 906 |
| Tapping Saddle fittings are available in pressure class 100 and 150 |
| Materials: |
| Polyethylene Branch Saddle: ASTM D 3350 |
| PE 3408 (Black) Cell classification 345454C |
| Threaded Brass insert: Brass Alloy C 360 or 303, 316 Stainless Steel |
| All materials meet requirements of NSF-Standard #61 |
| Test Standards: |
| Tapping Saddles are manufactured and assembled at POLY-CAM facilities and can be tested to the following standards: |
| ðATSM D 1598: Sustained Pressure Test |
| ðATSM D 1599: Burst Pressure Test |
| ðATSM D 1588: Constant-Tesile Load Joint Test (CTLJT) |
| ðAWWA C 906: Class 160 |
| All POLY-CAM Tapping Saddles are manufactured with precision machined threads to ensure optimal fit between saddle and valve. |
| Threaded inserts are manufactured with hex flange for rotation prevention during installation. |
| Standard fusion machines required for installation. |
| Fusion procedures and specificationavailable on request. |
| Fusion face tooling available from POLY-CAM. |
